Amazon.com ★★★★★ CORSAIR DOMINATOR PLATINUM RGB DDR5 RAM 32GB (2x16GB) 6000MHz CL36 AMD EXPO… $169.99 See it Do it All, and Do it Faster: As modern CPUs feature more and more cores, the unprecedented speed of DDR5 ensures your high-end CPU gets data quickly, enabling faster processing, rendering, and buffering than ever before. 12 Ultra-Bright […]
Do it All, and Do it Faster: As modern CPUs feature more and more cores, the unprecedented speed of DDR5 ensures your high-end CPU gets data quickly, enabling faster processing, rendering, and buffering than ever before.
12 Ultra-Bright CAPELLIX RGB LEDs: Each module is lined with 12 individually addressable LEDs to illuminate your PC with spectacular customizable lighting and low power consumption.
Patented CORSAIR DHX Cooling: Keeps DDR5 temperatures down by cooling both the ICs and the ground plane of the PCB itself with its own dedicated heatspreader, for high performance even under extreme loads.
Onboard Voltage Regulation: Reliable voltage at high frequencies enables easier, finely controlled overclocking through CORSAIR iCUE software than previous generation motherboard control.
Custom AMD EXPO Profiles: Customize and save your own AMD EXPO profiles via iCUE to tailor performance by app or task for greater efficiency (available later).
Put in one stick and enabled EXPO in BIOS then started up. Shut down and added the other 3 sticks. started up and it memory trained then booted perfect. Very fast at 6000MHZAMD 7950X BIOS 0805
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
allen –
As you may have heard the bios for the Asus Strix X670E boards are a complete mess. The 00805 bios work stable with XMP but the AMD drivers do not install all the drivers. You are pretty much to use the latest bios that cause the system to not boot if you are running on XMP/EXPO settings. I ended up finding this kit by Corsair and can confirm EXPO 1 and 2 work fine with Bios 1003. I hope Asus steps up and fixes this problem.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Ernesto –
Honestly ive not had very good experiences with any DDR5 memory but this kit for me was by far the worst. Trying to run this at anything other than stock resulted in blue screens of death. Installing the most recent bios’s did not help so these were promptly returned.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
L. Galarraga –
Demasiado buen rendimientoJusto lo que esperaba.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Steven Nguyen –
I’m sure that it’s a combination of my new motherboard and CPU along with this RAM but my system is very responsive. I’m very happy with its performance. Very satisfied.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Marlon Molina Güendel –
Ram Led cadencée a 6000mhz après reglages dans le bios.Attention a la hauteur si vous avez un gros ventilateur (dark rock dans mon cas)
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
allen –
funciona perfectamente , me agrada su sistema de personalización y su alta frecuncia de 6000 mhz
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Gregory –
good, except the leds are bright at night. The only way to fix it is to install iCUE but I did that in the past and it’s loads a ton of full-time memory resident apps and services.The EXPO profile worked and seemed to be stable even after extensive testing. In the past, I have used something similar for the intel side, XMP, but they were never really stable. Glad to see the timings that we are buying are actually working.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Amazon Customer –
Not much to say here other than the RGB looks great and runs well at rated 6000MHz with EXPO profile. No issues with the hardware.The software is OK-ish, bit clunky and could use improvements and some more effects, but overall decent. Caused high CPU usage at least a few times.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Rich –
Detected and running at 6000Mhz on EXPO on an Asrock Steel Legend X670E with BIOS 1.24. Stable and solid, no issues. iCUE software detected and the colours and effects are awesome. If you are looking for RGB RAM for an AM5 system, this will do fine. I don’t need ultra low latencies as I’m using a 7800X3D CPU which doesn’t really benefit from it as it has extra cache itself. I built a parallel system using G Skill Flare 6000Mhz non RGB – one for my friend and one for his son. If you don’t need RGB save yourself 40 quid and get that.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Gregory –
Excellent DDR5 RAM modules. I am using them with ASUS X670E-E, latest bios 1416 and 7950X3D CPU. Default EXPO I/ EXPO II settings didn’t work and this caused boot and stability issues.So what you can try:1.Set Fast boot to disabled.2.Set Memory context restore to enabled.3.Set VDDSOC voltage to manual and set it for 1.27v for example. It is limited to 1.3 maximum so no worries. Vsoc voltage can impact dram oc stability.4.And the most important try to increase DRAM VDD and DRAM VDDQ voltages. These RAM modules use Samsung IC chip so it is safe to keep VDD voltages between 1.10 – 1.40V and VDDQ voltages between 1.10V- 1.50V. Corsair support agent confirmed they are safe!I set mine both to 1.40V but you can try slowly increase from default 1.35V.After that mine system is stable. Tested with AIDA64 and other different tests showed system is stable.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Ryan –
Excellent product feels and looks very good
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Rich –
Mach das selbe wie normaler ram sehen aber geil aus xD
Helpful(0)Unhelpful(0)You have already voted this
Only logged in customers who have purchased this product may leave a review.
$487.87 BZD
Warning
Deleting file, please wait...
Add to wishlistAdded to wishlistRemoved from wishlist0
Ernesto –
Put in one stick and enabled EXPO in BIOS then started up. Shut down and added the other 3 sticks. started up and it memory trained then booted perfect. Very fast at 6000MHZAMD 7950X BIOS 0805
allen –
As you may have heard the bios for the Asus Strix X670E boards are a complete mess. The 00805 bios work stable with XMP but the AMD drivers do not install all the drivers. You are pretty much to use the latest bios that cause the system to not boot if you are running on XMP/EXPO settings. I ended up finding this kit by Corsair and can confirm EXPO 1 and 2 work fine with Bios 1003. I hope Asus steps up and fixes this problem.
Ernesto –
Honestly ive not had very good experiences with any DDR5 memory but this kit for me was by far the worst. Trying to run this at anything other than stock resulted in blue screens of death. Installing the most recent bios’s did not help so these were promptly returned.
L. Galarraga –
Demasiado buen rendimientoJusto lo que esperaba.
Steven Nguyen –
I’m sure that it’s a combination of my new motherboard and CPU along with this RAM but my system is very responsive. I’m very happy with its performance. Very satisfied.
Marlon Molina Güendel –
Ram Led cadencée a 6000mhz après reglages dans le bios.Attention a la hauteur si vous avez un gros ventilateur (dark rock dans mon cas)
allen –
funciona perfectamente , me agrada su sistema de personalización y su alta frecuncia de 6000 mhz
Gregory –
good, except the leds are bright at night. The only way to fix it is to install iCUE but I did that in the past and it’s loads a ton of full-time memory resident apps and services.The EXPO profile worked and seemed to be stable even after extensive testing. In the past, I have used something similar for the intel side, XMP, but they were never really stable. Glad to see the timings that we are buying are actually working.
Amazon Customer –
Not much to say here other than the RGB looks great and runs well at rated 6000MHz with EXPO profile. No issues with the hardware.The software is OK-ish, bit clunky and could use improvements and some more effects, but overall decent. Caused high CPU usage at least a few times.
Rich –
Detected and running at 6000Mhz on EXPO on an Asrock Steel Legend X670E with BIOS 1.24. Stable and solid, no issues. iCUE software detected and the colours and effects are awesome. If you are looking for RGB RAM for an AM5 system, this will do fine. I don’t need ultra low latencies as I’m using a 7800X3D CPU which doesn’t really benefit from it as it has extra cache itself. I built a parallel system using G Skill Flare 6000Mhz non RGB – one for my friend and one for his son. If you don’t need RGB save yourself 40 quid and get that.
Gregory –
Excellent DDR5 RAM modules. I am using them with ASUS X670E-E, latest bios 1416 and 7950X3D CPU. Default EXPO I/ EXPO II settings didn’t work and this caused boot and stability issues.So what you can try:1.Set Fast boot to disabled.2.Set Memory context restore to enabled.3.Set VDDSOC voltage to manual and set it for 1.27v for example. It is limited to 1.3 maximum so no worries. Vsoc voltage can impact dram oc stability.4.And the most important try to increase DRAM VDD and DRAM VDDQ voltages. These RAM modules use Samsung IC chip so it is safe to keep VDD voltages between 1.10 – 1.40V and VDDQ voltages between 1.10V- 1.50V. Corsair support agent confirmed they are safe!I set mine both to 1.40V but you can try slowly increase from default 1.35V.After that mine system is stable. Tested with AIDA64 and other different tests showed system is stable.
Ryan –
Excellent product feels and looks very good
Rich –
Mach das selbe wie normaler ram sehen aber geil aus xD